| 1. |
- Anders, Halldin, et al.
(author)
-
Improved osseointegration and interlocking capacity with dual acid treated implants: a rabbit study.
- 2016
-
In: Clinical Oral Implants Research. - : Wiley. - 0905-7161 .- 1600-0501. ; 27, s. 22-30
-
Journal article (peer-reviewed)abstract
- Aim To investigate how osseointegration is affected by different nano- and microstructures. The hypothesis was that the surface structure created by dual acid treatment (AT-1), applied on a reduced topography, might achieve equivalent biomechanical performance as a rougher surface treated with hydrofluoric acid (HF). Materials and methods In a preclinical rabbit study, three groups (I, II, and III) comprised of test and control implants were inserted in 30 rabbits. The microstructures of the test implants were either produced by blasting with coarse (I) or fine (II) titanium particles or remained turned (III). All test implants were thereafter treated with AT-1 resulting in three different test surfaces. The microstructure of the control implants was produced by blasting with coarse titanium particles thereafter treated with HF. The surface topography was characterized by interferometry. Biomechanical (removal torque) and histomorphometric (bone–implant contact; bone area) performances were measured after 4 or 12 weeks of healing. Results Removal torque measurement demonstrated that test implants in group I had an enhanced biomechanical performance compared to that of the control despite similar surface roughness value (Sa). At 4 weeks of healing, group II test implants showed equivalent biomechanical performance to that of the control, despite a decreased Sa value. Group III test implants showed decreased biomechanical performance to that of the control. Conclusions: The results of the present study suggest that nano- and microstructure alteration by AT-1 on a blasted implant might enhance the initial biomechanical performance, while for longer healing time, the surface interlocking capacity seems to be more important.
|
|
| 2. |
|
|
| 3. |
- Sul, Young-Taeg, 1960, et al.
(author)
-
The role of surface chemistry and surface topography of osseointegrated titanium implant: strength and rate of osseointegration.
- 2009
-
In: Journal of Biomedical Materials Research Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 89A:4, s. 942 - 950
-
Journal article (peer-reviewed)abstract
- The present study investigated the effects of surface chemistry and topography on the strength and rate of osseointegration of titanium implants in bone. Three groups of implants were compared: (1) machine-turned implants (turned implants), (2) machine-turned and aluminum oxide-blasted implants (blasted implants), and (3) implants that were machine-turned, aluminum oxide-blasted, and processed with the micro-arc oxidation method (Mg implants). Three and six weeks after implant insertion in rabbit tibiae, the implant osseointegration strength and rate were evaluated. Surface chemistry revealed characteristic differences of nine at.% Mg for Mg implants and 11 at.% Al for blasted implants. In terms of surface roughness, there was no difference between Mg implants and blasted implants in developed surface ratio (Sdr; p = 0.69) or summit density (Sds; p = 0.96), but Mg implants had a significantly lower arithmetic average height deviation (Sa) value than blasted implants (p = 0.007). At both 3 and 6 weeks, Mg implants demonstrated significantly higher osseointegration strength compared with turned (p = 0.0001, p = 0.0001) and blasted (p = 0.0001, p = 0.035) implants, whereas blasted implants showed significantly higher osseointegration than turned implants at 6 weeks (p = 0.02) but not at 3 weeks (p = 0.199). The present results not only support the hypothesis that biochemical bonding facilitates rapid and strong integration of implants in bone, but also provide evidence for biochemical bonding theory previously proposed by Sul. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
|
|
